Metric Release Notes

Improved ✨

• Enhancement to the velocity detection algorithm.
  The increase in fidelity with version 0.2.0 exposed a skew in Metric’s measurement of fast movements where bar speed exceeded ~0.8m/s mean velocity. This update removes this skew at faster velocity, further improving Metric’s validity and correlation to MOCAP reference data. Users may see notable change to their reported velocity for fast reps.

Fixes 🐛

• Fixed a selection of annoying crashes.
  Metric pushes some older devices to the limit, often asking too much (of their memory and graphic processing). Metric is now less demanding, so older devices should no longer throw in the towel during sets!

‍

Improved ✨

• MAJOR UPGRADE to the velocity detection algorithm.
  Metric has been overhauled to enable high frame rate analysis at higher video resolution. This results in superior measurement fidelity and processing speed. Metric could previously process live video at 480p resolution at throttled frames per second. Significant re-writing of code now enables live video processing at HD 720p resolution and 60 frames per second. To say we are ecstatic about this update is an understatement!
• Tweaking the movement triggers that end set recording.
  Metric should end the set recording when you pick up your device, but not when you bump it or drop weights. The device accelerometer monitoring has been tuned to better distinguish events and this should prevent set recording from ending early. We expect the trigger algorithm will need further refinement but this version should be a big step in the right direction!

Fixes 🐛

• Fixed a selection of annoying crashes. Metric would spontaneously and dramatically stop in the middle of some users’ workouts. Now it should be more considerate and keep working for as long as you do.
• Made the results table display more reps. Some users (who apparently enjoy pain and discomfort) would do sets of more than 17 reps. Metric previously couldn’t scroll that far on the results table, but now displays as many rows as required to pinpoint the exact moment you lost the will to go on.
• Reduced media playback cut-outs. Your music or podcasts will cut-out at least 50% less often when starting sets. The other 50% is still unresolved but we continue to aim for perfection!

Improved ✨

• Update to the ROM measurement algorithm. Metric uses a velocity threshold to determine the starting point of each rep when calculating ROM. This could result in overly short ROM for very slow reps. Now the algorithm waits for the velocity threshold, but travels back in time to where the bar first moved. As a result, the Metric ROM calculation is now more accurate without counting false reps.
• Sticking-point recognition. When you hit a sticking point Metric would sometimes think you had actually reached the end of your rep. Now Metric believes in you, and will keep measuring the rep all the way to the top as you grind it out!
• Refined the device movement trigger for ending recordings. Metric stops recording when you pick up your phone. Previously the movement trigger was a little too sensitive, and vibrations from dropping weights could end your set too early. Metric should now recognise the difference between vibrations and you actually picking up your phone.

Fixes 🐛

• Fixed a bug that resulted in some users experiencing a crash while recording their sets. We were able to replicate the bug and Metric should now stay open and continue recording instead of just quietly giving up.
• Tidied up pixels that were not quite up to par with a few UI tweaks (thanks Andrew!) so the interface is now in a better place.

Fixes 🐛

• Fixed a bug where after selecting your weight Metric would correctly display the camera briefly, before incorrectly returning you back to the weight selection screen. This was due to a known problem with certain versions of iOS 14. Now instead of being refused entry to the future of VBT, Metric users on iOS 14 can actually experience it!
• Changed the app settings so it is no longer available on iPad. Truthfully Metric wasn't built for iPad, so users who installed it found everything was a bit off. One day soon we will make a version for iPad... but that is not today!

What's New 🚨

Movement warnings prior to recording

‍Because the device must be stationary to correctly measure velocity, Metric now features warnings when the phone is moved or not in a vertical position. This prevents you from recording sets before the camera is correctly positioned.

Picking up the device ends recording

To make it faster to end a set simply pick up your phone. Metric will automatically stop the recording when it detects movement.

Removed video upload feature

Now that in-app recording is working great, we no longer need the ability to upload footage from the camera roll for testing. This simplifies using the app, and also stops users uploading videos that have movement or the wrong camera settings, both of which were resulting in sub-par data.

Improvements ✨

• Velocity-time trace graph upgraded. Metric now shows a much better looking and more readable graph.
• Minor changes to text sizing and colours.

Fixes 🐛

• Fixed a text wrapping issue on some crucial pieces of information on several buttons and alerts. There's nothing worse than when a sentence just...
• Certain progress indicators were not being displayed at the right time. They now show up where they should, letting you know that Metric is processing your video rather than frozen!

‍

What's New 🚨

Set Summary Page

After your set you will now be directed straight to a set summary highlighting key numbers from your set like best rep velocity, velocity loss and ROM variance

Bar charts

We now have a rep-by-rep bar chart in the Set Review screen which helps if you are the visual type! It is excellent for understanding how performance changed over the course of your set.

Onboarding tutorial

The key instructions for using Metric are now in an illustrated onboarding when you open the app for the first time, and also available from a Help button on the Home Screen.

Improvements ✨

• Enhanced post-set workflow.
  When you have finished reviewing a set you can now save it and immediately start your next set with the press of a single button.

Fixes 🐛

• Fixed landscape orientation killing the app. We have locked the app in Vertical orientation to prevent it becoming very not functional if you turned your phone on its side.
• In certain cases racking and un-racking the bar was being mis-categorised as a rep. The rep detection model should now properly ignore racking and un-racking!

What's New 🚨

HD Video

Metric records sets in HD from either the rear or front-facing camera at 60 FPS. This means when you save the video to your camera roll it will be nice and crispy, just like your lifts.

Exercise and load picker

Prior to recording you can now select your exercise and weight. This information is then displayed on the Set Review screen so you can remember what you are looking at. If you screenshot your results this is quite helpful.

Improvements ✨

• Listen to music while recording your sets.
  Previously when recording a set the video camera would take control of the audio, interrupting whatever you had playing. We wrestled the audio back under your control so you can keep smashing PRs to Tay Tay!
• Less numbers on the review screen.
  We have simplified the set analysis page to just highlight Mean Velocity and ROM. We also reduced decimal places to make the results table much easier on the eyes.
• The rep and velocity detection model got better (again).
  Uploaded videos process much faster, and missed reps should be few and far between now.
  

Fixes 🐛

• Fixed a strange flicker where dark-mode or light-mode switched for a moment when going from recording back to the app home screen. The flicker is no more.
• Fixed a crash which happened for some users on first installing the app. Metric was asking too many questions about your device when you opened it. It’s much more restrained now. Everything is on a need-to-know basis.

What's new 🚨

No new features in this release — this update is focused entirely on stability and performance.

Improvements ✨

• Faster post-recording processing. Set data processes faster after you finish recording, getting you to your results sooner.
• Improved selfie cam tracking. Barbell detection on the front-facing camera is now more accurate and consistent.

Bug fixes 🐛

• Fixed numerous crashes during video import and processing
• Fixed a bug where users with a large set history couldn't open the app
• Fixed a crash in the velocity trace chart when reviewing longer video sets
• Fixed selfie cam data and bar path being inverted
• Fixed Google sign-up failing for some users

What's new 🚨

Personal record badges
‍Every set now shows animated record badges for load, mean power, reps, and mean velocity — each displayed as a percentage of your all-time best. Tap any badge for a detail sheet with context on where you stand: new record, closing in, or building your baseline.

Velocity trends
‍A new trend card compares your current set velocity against your six-week historical average. See at a glance whether you're trending up (well recovered and ready to push, trending down (potentially fatigued or not lifting with intent), or holding steady, and tap through for a detailed chart breakdown. Learn more about how Metric calculates Trends here →

Set quality warnings
‍After each recording, Metric now analyses your setup and flags potential issues — viewing angle, framing, plate size, 0 rep reps, and device stability. These replace the old generic "no reps" message with specific, actionable feedback so you can fix issues and get better data on your next set.

Device stability detection
‍Your phone now needs to be stable before recording can begin. An on-screen status pill shows whether your device is ready, needs to be held steady, or stood upright. Recording is disabled until the device is stationary and automatically stops if significant movement is detected mid-set.

Fullscreen video playback
‍Video playback can now be expanded to full screen with a tap. Includes a time scrubber, mute toggle, and your bar path and stats overlay — all carried over seamlessly between the mini player and expanded view.

Intuitive video playback
Video thumbnails are now extracted from the first rep in your set to provide better context and video playback now starts playing from 1 second your first rep starts, making technique review more efficient.

Improvements ✨

• Set history improvements. More details are now included on your set history list including a video thumbnail, your best rep velocity and % fatigue in the set.
• Faster real-time processing. Frame rates during live recording have jumped from 30fps into the high 40s and low 50s on devices that support 60fps, meaning smoother tracking and fewer missed data points.
• Smarter weight formatting. Decimal loads like 72.5kg now display correctly across the app.

Bug fixes 🐛

• Fixed set data failing to load on some sessions
• Fixed an issue where Real-time recordings were dropping video frames during processing
• Fixed an issue with video imports and crashes on some Android chipsets and devices

What's new 🚨

Set highlight bar
‍The set review screen now shows your best rep, set average, and fatigue/consistency metrics right at the top. Key performance data for every set, all at a glance.

Improvements ✨

• Midpoint zoom for ultrawide cameras. Wide ultrawide lenses (0.5x, 0.6x) now snap to a tighter midpoint zoom (0.75x, 0.8x), making it easier to frame your setup without switching cameras.
• Persistent selfie cam settings. Your camera selection and zoom level now carry over between sets, so you're not re-adjusting every time you hit record.
• Faster video imports. All imported videos process significantly faster, with 1080p processing speeds up to 2x quicker than before.

Bug fixes 🐛

• Fixed a crash when importing 4K video
• Fixed bar path inversion on selfie cam recordings
• Fixed video rotation detection on imported videos on some Android devices that was causing zero reps or only detecting walkouts (XY axis inversion)
• Fixed a spacing issue on the record action button
• Improved recording controls layout
• Disabled uploading 480p videos, which don't have enough resolution for accurate barbell tracking

What's new 🚨

Android Beta - Metric has finally arrived on Android, you can still join the Android beta at this link →

Metric for Android is here (Private Beta)
The Android beta is a focused first release, available exclusively to waitlist members, built to bring velocity-based training to every platform.

We deliberately kept the feature set small so we could ship sooner, gather feedback, and iterate.

Available now you can:

• Account creation and sign-in (syncs with your existing Metric account if you have one)
• Record sets directly in-app or import videos from your camera roll
• 1080p HD video recording
• Real-time velocity, ROM, bar path, and tempo data
• Video playback with bar path overlay
• Video export with data overlay
• Training history on your home screen

Barbell tracking with computer vision
‍Record or import your sets and get instant set data including mean velocity, range of motion and eccentric tempo. The same tracking engine that powers Metric on iOS, is now available on your Android device.

Video playback with bar path overlay
‍Playback your sets and export the video with a real-time bar path overlay, then export and share videos directly from the app. Your training footage just became a coaching tool.

Training history, search, and sharing
‍Every set and video is saved to your free training profile. Search through your historical data, review past performance, and share sets with your coach or training partners — all at a glance.

Report bugs, provide feedback
Report bugs, suggest features and give feedback to the Metric team from inside the Metric app or join the Metric Discord